Colour Enhancer for Stone Surfaces

Incl. 19% VAT
(incl. Tax 19%, plus Shipping)
Basic price: 23,10 € / l
0,5 l bottle

Article information


Enhances colour and structure and reduces susceptibility to soiling. Treated surfaces look fresher, almost as though they were wet. The Colour Tone Deepener is water-resistant and highly UV-resistant. The water-resistant effect protects the stone and makes it easier to care for. Colour Tone Deepener is bonded to the substrate to provide long-lasting protection both indoors and outdoors. Dries quickly.

Made in Germany

Hazard information


Flammable liquid and vapour. May be fatal if swallowed and enters airways. May cause drowsiness or dizziness. Harmful to aquatic life with long lasting effects. Repeated exposure may cause skin dryness or cracking.

For all absorbent natural and artificial stone plates and flags, e.g. slate, marble, limestone, sandstone, terrazzo, Solnhofener flags, open-pored clinker, fair-faced concrete and concrete cut stone. Also suitable for flamed or sawn granite or rough-split porphyry. Due to the high level of wear resistance of this product, it is also suitable for alkaline substrates such as concrete. For floors, stairs, house entrances, terraces, balconies, windowsills, wall coatings, etc.
Ventilate generously when using product indoors. Can be applied in several additional layers if the effect wears off. If white spot develop after drying, this means the stone contains moisture. The stone must be protected from moisture, including moisture from the substrate, by a suitable insulting layer. Do not use product at temperatures below 10°C. Do n ot apply in the sun or at surface temperatures exceeding 25°C. Not suitable for fine stonework, polished marble or granite or other substrates with little or no absorbency.
Clean surface. For surfaces that are not acid-sensitive, such as unglazed ceramic tiles, we recommend MELLERUD Tiles and Stone Cleaner. For all other calcareous natural and artificial stone types such as marble, terrazzo, slate, sandstone, etc., we recommend MELLERUD Intensive Basic Cleaner. Then allow to dry thoroughly. The surface must be dry before application. (Average waiting period for newly laid surfaces: up to 8 weeks, otherwise after rain or cleaning: several days). Apply MELLERUD Colour Tone Deepener with a brush or roller in an even, thin coat. It is very important to match the amount of product used to the absorbent capacity of the stone. Do not work excessive amounts. Oversaturation results in smearing. The sealer is dry and can be walked on after a brief period, but it should be protected from moisture for 24 hours.
Ingredients: mixture of resins and silicones in hydrocarbons
PH value: /
Density: 0,78 g/cm3
Consumption: 0,5 l adiquate for ca. 5-10 m2, depends on adsorbency and kind of the surface
Package: (23,10 EUR / l)