Water System Cleaner

Incl. 19% VAT
(incl. Tax 19%, plus Shipping)
Basic price: 52,50 € / l
0,5 l bottle

Article information


Disinfects, cleans, removes deposits and odours. A powerful 2-component system which provides hygienic cleanliness in tank systems. Odourless and powerful. Tanks, pipes and taps are cleaned and freed from stubborn deposits. A special organic acid removes limescale. Active oxygen removes mould layers and bacteria from the internal walls of tanks, pipes and taps, and destroys them. Combats the development of unpleasant odours. Does not corrode rubber, plastics or stainless steel. Environmentally-friendly, biodegradable and chlorine-free. (Use biocides safely. Always read the label and product information before use.).

Made in Germany

Hazard information


Causes serious eye damage.

Security advise

Biozidprodukte vorsichtig verwenden. Vor Gebrauch stets Etikett und Produktinformationen lesen.

Tank systems of motorhomes, caravans and camper vans. For tanks, pipework, pumps, and taps.
Leave the tank lid open during the activation period - otherwise a build-up of pressure could occur! For large tanks, it is also possible to partially empty them after cleaning directly via the discharge nozzle of the fresh water tank, but discharging via the waste water tank means the tank and pipework have to be cleaned again. Always completely fill the tanks with water. A low water level favours the growth of algae and bacteria. Tanks and pipework should be cleaned and disinfected at least twice a year. Do not use on acid-sensitive surfaces. Avoid contact with plants.
Empty the tank. Mix the System Cleaner (component A) with 10 litres of water, and pour into the tank, which has newly been 1/3 filled with water. Afterwards, remove Water Tank System Cleaner (component B) from its plastic film and add it to the tank. If possible, move the vehicle in order to wet the walls of the tank. Leave to act for an hour. Open the water taps in order to fill the pipes. Turn the pump off again. Afterwards, fill up with water and leave to act again for at least an hour, and if possible overnight. Afterwards, empty the tanks and pipework via the tapping points into the waste water tank. If the water is left in the waste water tank for 1-2 hours, it provides additional cleaning of the tank. Empty out into the disposal point or the sewer system. Rinse out with clean water. Finally, unscrew the filters (aerators) on the water taps and clean them with System Cleaner component A. Rinse out with clean water. Repeat the whole process if the system is very dirty.
Ingredients: Component A: Waterbased mixture of surfactants with organic acids Component B: Tab of potassiummonopersulphate and effectiv booster
PH value: Komponente A: ca. 2,0 (sauer)Komponente B: ca 4,0 (schwach sauer)
Density: Komponente A: 1,02 g/cm3
Consumption: 120 L Tank 250 ml Component A + 2 Tabs Component B 60 L Tank 125 ml Component A + 1Tab Component B