Hygienic cleanliness in kitchens and bathrooms
When it comes to sealing joints and other gaps, extra silicone likes to settle in places where it doesn't belong. Like on bath tubs, shower baths, sinks, windows, mirrors, etc. A hassle for every amateur and professional craftsman. But it doesn't have to be that way! MELLERUD Silicone Remover helps you easily remove residual silicone.
Hygienic cleanliness in kitchens and bathrooms is seen first and foremost in the joints between walls and floor tiles, door handles, facing bricks, facing strips and natural stone. MELLERUD Joint Cleaner removes greasy/oily soiling, incrustations, polish sediments, remnants from cooking and frying and restores cleanliness. Follow up with MELLERUD Joint Impregnation for cleanliness that protects your materials.
MELLERUD Silicone Remover
MELLERUD Silicone Remover completely removes fresh and dried silicone from ceramic, enameled, acrylic, wooden, glass and porcelain surfaces, for example. For indoor and outdoor use. Can be used on bath tubs, shower baths, sinks, windows, mirrors and many other surfaces and materials. Available in 0.25 L containers.
MELLERUD Grout Impregnator
A special impregnation for all absorbent joint materials that is permeable to water vapour. MELLERUD Grout Impregnator protects against moisture, as well as oily, greasy and water-based soiling. For indoor and outdoor use with wall and floor tiles. Available in 0.5 L containers.
MELLERUD Grout Cleaner
Powerful cleaning, tile for tile. Hygienic cleanliness in joints between walls and floor tiles, door handles, facing bricks, facing strips and natural stone. Greasy/oily soiling, incrustations, polish sediments and remnants from cooking and frying don't stand a chance. Available in 0.5 L containers.
3 Tips for joints that stay clean
TIP 1: Remove residual silicone
The surface area must be dry. Apply MELLERUD Silicone Remover evenly using a brush, for example. Let sit for approx. one hour for light silicone residue. Allow approx. 12 hours for more stubborn residue. You can then easily remove the silicone with a palette knife or sponge.
TIP 3: Finish with long-term protection
Joints must be clean and completely dry. Apply the impregnation to the joints using a brush. Remove any excess from joints or stone with a damp cloth or sponge within 24 hours of application. Allow to set for 24-48 hours. The surface can be cleaned normally after 36-48 hours. Wait approx. 3 hours before walking on surface.
TIP 2: Clean the joints
Spray MELLERUD Joint Cleaner directly onto the joints. Allow the product to set for a few minutes. Then clean with a sponge, scrubber or brush. Rinse tool regularly with clear water. Then wipe surface clean with water.
Use MELLERUD Mould Killer with Chlorine to clean deposits, discolouration or mould for heavily soiled, older joints.
Start by using the silicone and glass ceramic stovetop scraper to carve out the bulk of the silicone joints when renewing old joints that have become unsightly. Then use the Silicone Remover to remove any remaining silicone.